Fermion - SHTC3 I2C temperature and humidity sensor - DFRobot SEN0414
Бестселлер
- Артикул:
- 111100074
1 090 ₽
Характеристики
- Точность измерения температуры датчика
- +/- 0.2°C
Общие характеристики
- Датчик - Температура от
- -40 °C - 120 °C
- Датчик - Температура до
- 125 °C
Прочие свойства
- Бренд
- DFRobot
Свойства
- Подключение
- I2C
Описание
Product description: Fermion - SHTC3 I2C temperature and humidity sensor - DFRobot SEN0414
The SHTC3 temperature and humidity sensor sits on the Fermion series DFRobot board. SHTC3 allows to measure humidity in the range from 0% to 100% RH with an accuracy of ±2% RH and temperature in the range from -40°C to 125°C with an accuracy of ±0.2°C. The module uses I2C interface for communication. The board is powered from 3.3 V to 5 V and draws less than 0.15 mA in low-power mode, making it ideal for battery-powered mobile and wireless devices.
SHTC3 temperature and humidity sensor module. Goldpin strip included.
DFRobot Fermion module.
Main features of the SHTC3 sensor
- Temperature and humidity measurement
- High accuracy
- Low power consumption mode
- I2C interface
- Small dimensions
- Fast response time
- HVAC
- Automotive
- Data loggers
- Weather stations
- Domestic appliances
Temperature sensor module pinouts
The SHTC3 temperature sensor module communicates with the microcontroller via an I2C interface. The board is powered from 3.3 V to 5 V.
- VCC - supply voltage from 3.3 V to 5 V
- GND - system ground
- SCL - I2C interface clock line
- SDL - I2C interface data line
Example of connection with DFRobot overlay to Arduino.
DFRobot module with SHTC3 temperature and humidity sensor - I2C.
SHTC3 temperature and humidity sensor specification
- Supply voltage: 3.3 V to 5 V
- Current consumption: 0.45 mA
- Communication interface: I2C
- Humidity measurement range: from 0% to 100% RH
- Accuracy of humidity measurement: ±2% RH
- Temperature measurement range: -40°C to 125°C
- Temperature measurement accuracy: ±0,2°C
- Response time: 8s
- Mounting hole diameter: M2 (2 mm)
- Mounting hole spacing: 10 mm
- Dimensions: 14 x 17 mm
Useful links
- Manufacturer's website: DFRobot SEN0414
- User guide
- Documentation SHTC3
- Diagram