Характеристики
- Напряжение от
- 5.0 V
- Напряжение до
- 3.3 V
- Датчик - Температура от
- -40 °C - 120 °C, 40 °C - 120 °C
- Датчик - Температура до
- 85 °C
Порты и интерфейсы
- Подключение
- I2C
Прочие свойства
- Бренд
- Itbrain Power
- Тип датчика
- air quality, temperature, humidity, pressure
Описание
Module equipped with BME688, the first gas sensor with artificial intelligence (AI) and integrated humidity and temperature sensor with high linearity and high accuracy. The gas sensor is capable of detecting volatile organic compounds (VOCs), volatile sulfur compounds (VSCs) and other gases such as carbon dioxide equivalent (CO2e) and hydrogen in the ppb range. The BME688 sensor has high sensitivity and responds to most VOCs as well as many other air pollutant gases. The intensity of the signal changes with the reactivity of the chemical gases. The BME688 sensor measures temperature from -40°C to 85°C, humidity from 0% to 100%, and pressure from 300 hPa to 1100 hPa. The module uses an I2C interface for communication. It is powered by 3.3 V or 5 V.
- Temperature measurement range: from -40°C to 85°C
- Humidity measurement range: from 0% to 100%
- Pressure measuring range: from 300 hPa to 1100 hPa
- Main gas sensor outputs (via BSEC): IAQ, bVOC & carbon dioxide equivalent (CO2e) (ppm), gas scan result (%) & intensity level
- IAQ sensor to sensor deviation: +/- 15% / +/- 15 IAQ
- Relative humidity tolerance / hysteresis accuracy: +/- 3% / ≤ 1,5%
- Absolute temperature accuracy: +/- 0.5°C (at +25°C)
- Pressure measurement error: +/- 0,25%
On the board there are 5 solder pads with I2C interface. Module is powered by 3.3 V or 5 V.
- VIN - supply voltage 3.3 V / 5 V
- 3V3 - VDD - LDO
- SDA - I2C bus data line
- SCL - I2C bus clock line
- GND - ground.
Leads of the BME688 sensor.
- Supply voltage: 3.3 V or 5 V
- Interface: I2C
- Option to select I2C voltage via jumper (e.g. 5 V supply and I2C 3.3 V)
- Alternative I2C address by soldering the jumper
- Compatible with Arduino, Raspberry Pi and other modules
- Supports both Arduino (C) and Raspberry Pi (Python) language
- Compatible with xyz-mIoT boards
- Large solder pads with 2,54 mm pitch
- Dimensions: 13 x 27 mm
- Weight: 2 g
- Manufacturer homepage
- Documentation of the BME688 sensor
- Example of connection with Arduino