SPEEDBOX E6000 Delimiter
Бестселлер
- Артикул:
- 111801022
27 290 ₽
Характеристики
Прочие свойства
- Бренд
- SPEEDBOX
Свойства
- Цвет
- Черный
Описание
SpeedBox 1.0 allows you to suppress the speed limiter of your electric bike.
When in use, the actual speed will appear on your display up to 22 km/h.
Then, the speed indicator stabilizes and continues to show the same value even at higher speeds.
Activation:SpeedBox is constantly activated.
Deactivation:By pressing the LIGHT button.
Speed limiter:Up to 99 km/h.
Display shows:Actual values up to 22 km/h.
Compatible with :
E6000 Shimano motors ( without Di2 ).
Not compatible:
SpeedBox App.
Di2 (electronic shifting system).
Installation and use.
Mounting.
When connecting the SpeedBox chip to an e-bike you will find colored connectors to make the installation very easy.
We have prepared detailed instructions and videos to facilitate the installation.
The disassembly of our tuning chip is just as easy.
If you have any problems with installation or removal, please do not hesitate to contact us.
If you plan to install SpeedBox on a new bike, be sure to ride it for at least 1 km before the chip is activated.
IMPORTANT NOTICE.
Please note that the use of modified electric bicycles in infrastructure may be in conflict with the legislation in force in some countries.
The manufacturer is not responsible for damages resulting from the use of SpeedBox products.
Electric bicycles equipped with SpeedBox products cannot be used on roads, cycle paths and public areas.
Electric bicycles equipped with SpeedBox products may only be used on your own property, solely at your own risk.
The use of SpeedBox products may void the warranty of your electric bike.
We recommend the use of additional protection products to avoid injuries.
In case of loss of service password or pin, you can use our service available here.
IMPORTANT NOTICE.
ONCE A SPEEDBOX IS INSTALLED ON YOUR E-BIKE YOU SHOULD NEVER UPDATE THE SOFTWARE.
Speedbox recommends you not to update your E-bike, as the chip may give errors, otherwise speedbox will not be responsible for any incident.
In the case of updating it will be under your responsibility.
FOLLOW THE FOLLOWING STEPS IN CASE OF HAVING TO UPDATE THE SOFTWARE OF YOUR E-BIKE ( In case of updating it will be under your responsibility ).
1) Uninstall SpeedBox from the electric bike.
2) Update the software.
3) Reinstall SpeedBox
When in use, the actual speed will appear on your display up to 22 km/h.
Then, the speed indicator stabilizes and continues to show the same value even at higher speeds.
Activation:SpeedBox is constantly activated.
Deactivation:By pressing the LIGHT button.
Speed limiter:Up to 99 km/h.
Display shows:Actual values up to 22 km/h.
Compatible with :
E6000 Shimano motors ( without Di2 ).
Not compatible:
SpeedBox App.
Di2 (electronic shifting system).
Installation and use.
Mounting.
When connecting the SpeedBox chip to an e-bike you will find colored connectors to make the installation very easy.
We have prepared detailed instructions and videos to facilitate the installation.
The disassembly of our tuning chip is just as easy.
If you have any problems with installation or removal, please do not hesitate to contact us.
If you plan to install SpeedBox on a new bike, be sure to ride it for at least 1 km before the chip is activated.
IMPORTANT NOTICE.
Please note that the use of modified electric bicycles in infrastructure may be in conflict with the legislation in force in some countries.
The manufacturer is not responsible for damages resulting from the use of SpeedBox products.
Electric bicycles equipped with SpeedBox products cannot be used on roads, cycle paths and public areas.
Electric bicycles equipped with SpeedBox products may only be used on your own property, solely at your own risk.
The use of SpeedBox products may void the warranty of your electric bike.
We recommend the use of additional protection products to avoid injuries.
In case of loss of service password or pin, you can use our service available here.
IMPORTANT NOTICE.
ONCE A SPEEDBOX IS INSTALLED ON YOUR E-BIKE YOU SHOULD NEVER UPDATE THE SOFTWARE.
Speedbox recommends you not to update your E-bike, as the chip may give errors, otherwise speedbox will not be responsible for any incident.
In the case of updating it will be under your responsibility.
FOLLOW THE FOLLOWING STEPS IN CASE OF HAVING TO UPDATE THE SOFTWARE OF YOUR E-BIKE ( In case of updating it will be under your responsibility ).
1) Uninstall SpeedBox from the electric bike.
2) Update the software.
3) Reinstall SpeedBox
