Step-Up/Step-Down Voltage Regulator S13V10F5 - 5V 1A - with headers - Pololu 4083
- Артикул:
- 55348383
Характеристики
- Стабилизатор - Тип 2
- линейный
- Выходное напряжение от
- 5.0 V
- Выходное напряжение до
- 5.0 V
Общие характеристики
- Напряжение до
- 2.8 V
- Напряжение от
- 22.0 V
- Стабилизатор - Тип
- step-up/down
Прочие свойства
- Бренд
- Pololu
Энергопитание
- Сила тока
- 1 A
Описание
Step-up / step-down voltage converter Pololu S13V10F5 with soldered male goldpin connectors. The output voltage of the converter is 5 V, and its current efficiency is 1 A. The input voltage range is 2.8V to 22V . Step-up / step-down converters are useful in applications where the supply voltage can vary considerably, such as with batteries. The regulator's efficiency ranges from 85% to 95% and can deliver approx. 1 A current depending on the input voltage. The converter is equipped with an undervoltage lock, output overvoltage protection and overcurrent protection. The overtemperature shutdown function also helps prevent damage from overheating, while the soft-start function limits the inrush current and gradually increases the output voltage during startup.
- Input voltage: 2.8 V to 22 V
- Output voltage: 5V with an accuracy of 3%
- Typical maximum output current: 1A
- Typical efficiency: 85% to 95% depending on input voltage and load
- Typical quiescent current: 10 mA to 20 mA without load
- Input undervoltage lockout and input overvoltage protection
- The soft-start function limits the inrush current and gradually increases the output voltage
- Over-current protection and cut-off against overheating
- Fixed switching frequency: ~ 500kHz
- Soldered goldpin male connector
- Compact size: 8.9 x 12.1 x 4.2mm
The voltage regulator module is equipped with three connectors: input voltage (VIN) , ground (GND) and output voltage (VOUT) . The input voltage (VIN) range is 2.8 V to 22 V. The VOUT connector provides 5 V output voltage from the inverter. The module has a soldered goldpin male strip. With it, the module can be plugged directly into the breadboard .
The efficiency of an inverter, defined as (power output) / (power input), is an important measure of its efficiency. especially when it comes to battery life or heat generation.
The maximum value of the output current reached by the controller varies with the input voltage, but also depends on other factors such as ambient temperature, air flow and heat absorption. The diagram shows the maximum output currents that the controller can deliver continuously at room temperature, without airflow and additional heat dissipation.
The quiescent current is the current that the inverter uses to power itself, and the graph shows this as the input voltage.
- Input voltage: 2.8 V to 22 V
- Output voltage: 5V
- Continuous output current: typical 1A
- Maximum quiescent current: 20 mA
- Connector: soldered, male goldpin
- Dimensions: 8.9 x 12.1 x 4.2 mm
- Weight: 0.6 g
- S13V10F5 - step-up / step-down converter - 5V 1A - Pololu 4083 - with connectors
- Simple 1x 3-pin goldpin strip, 2.54 mm pitch
- Manufacturer's website: Pololu # 4083
- Dimensions