Two-color graphical OLED display 0.96 '' (A) 128x64px SPI/I2C - angled connectors - Waveshare 9085
- Артикул:
- 53916937
Характеристики
Прочие свойства
- Бренд
- waveshare
Экран
- Тип экрана
- СОЛОМА
- Сенсорный экран
- Нет
- Диагональ экрана
- 0,96"
- Разрешение экрана
- 128x64px
Описание
0.96" OLED display with 128 x 64 px resolution, yellow and blue. The screen is based on the SSD1306 controller, works with 3.3 V and 5 V, communicates via SPI or I2C.
This version has soldered-in angled goldpin connectors, in our offer you will also finda display with straight pins.
The manufacturer provides auser guideandlibraries to operate the screen.
Connecting the displayThe module has soldered-in angled goldpin connectors - 2.54 mm raster, communicates via SPI or I2C interface. The description of individual outputs can be found in the table.
Pin Symbol Description 1 VCC Supply voltage from 3.3 V to 5.0 V. 2 GND The weight of the system. 3 NC Leave it unconnected. 4 DIN SPI / I2C communication interface data line. 5 CLK Clock line of the SPI / I2C communication interface. 6 CS Selection of the SPI bus device, activated by a low state. 7 D/C Selection of the operating mode - low state means command transfer, high - data transfer. 8 RES System reset, activated in a low state. Configuration of the moduleThe communication bus is selected using the jumper BS0 and BS1, which are located on the back of the board. By default, the display works in 4-wire SPI mode. Detailed information can be found in the table below.
Mode
work
Pin
BS0
Pin
BS1
Function
DIN
FunctionSCK
3-wire SPI 1 0 MOSI SCLK 4-wire SPI 0 0 I2C 0 1 SDA SCThe jumper for mode selection is located in the middle of the module: BS1 and BS0.
Display specification- Operating voltage: 3.3 V to 5.0 V
- Controller: SSD1306 (documentation)
- Communication: SPI / I2C
- Selection of the operation mode using jumper BS0 and BS1
- Display type: OLED
- Diagonal: 0,96"
- Resolution: 128 x 64 px
- Colours: yellow and blue
- Viewing angle: over 160°
- Operating temperature: -20 °C to 70 °C
- Soldering goldpin connectors - raster 2.54 mm
- Dimensions: 33.5 x 33 mm
- The manufacturer's website: Waveshare
- PDF User Guide
- Wiki manufacturer's guide
- Module diagram
- Libraries for display
- SSD1306 documentation